ZentraFuel uses multi-transport mesh networking to relay sensor data from pipelines, tanks, and fuel stations in areas with no cellular or internet service. Track supply chains with tamper-proof records. Coordinate fuel distribution during emergencies.
Fuel disappears between refinery and pump. Siphoning from pipelines, short deliveries to stations, and adulteration go undetected because there's no continuous chain of custody verification.
Traditional SCADA systems require cellular or satellite connectivity. Remote pipelines, tank farms, and rural fuel depots sit in coverage dead zones with no real-time data.
After hurricanes and grid failures, nobody knows which stations have fuel and power. Panic buying and misallocation waste critical supplies while communities go without.
Each built on the same mesh networking infrastructure -- devices relay data node-to-node across Bluetooth, Wi-Fi Direct, LoRa, and radio where traditional networks can't reach.
IoT sensors on pipelines, storage tanks, and pump stations relay readings through a mesh network that works without cellular coverage.
Every transfer from refinery to truck to station is recorded with volume measurements at each checkpoint. Discrepancies are flagged automatically.
During disasters, station operators broadcast fuel availability through the mesh. No cell towers or internet required. Response teams see real-time fuel availability.
Sensors connect to nearby mesh nodes. Data hops node-to-node until it reaches an internet-connected gateway or is stored locally for retrieval.
Place nodes at monitoring sites. Each node communicates via Bluetooth (300ft), Wi-Fi Direct (600ft), LoRa (10+ miles), or radio (100+ miles).
Attach IoT sensors for tank level, pressure, temperature, and flow rate. Sensors feed data to the nearest mesh node automatically.
Readings hop node-to-node across the mesh until reaching a gateway with internet. In fully off-grid scenarios, data is stored and forwarded when connectivity returns.
Sensor readings are hashed (SHA-256) and recorded in a tamper-proof ledger. Auditors and regulators can verify no data was altered after the fact.
Purpose-built for fuel infrastructure in areas where traditional monitoring falls short.
| Capability | Traditional SCADA | ZentraFuel |
|---|---|---|
| Works without cell coverage | Requires cellular or satellite | Yes -- mesh relay up to 100+ miles |
| Works during power outages | Requires grid power or backup | Yes -- battery-powered nodes |
| Tamper-proof data records | Database records can be altered | Yes -- SHA-256 hashed, immutable ledger |
| Supply chain tracking | Separate system required | Built-in batch tracking with QR/NFC |
| Emergency coordination | Not designed for disasters | Off-grid station status broadcasting |
| Deployment time | Weeks to months | Hours -- place nodes and go |
| Upfront hardware cost | $10,000 -- $50,000+ per site | Under $500 per node |
| Monthly connectivity fees | $50 -- $200/mo per site (cellular/sat) | $0 -- mesh is peer-to-peer |
We offer a free 30-day pilot deployment at your site. 3-5 mesh nodes, real sensors, real data. No commitment.
Request a Pilot -- charles@zentrafuel.com